MapTool 1.3 Bugfix Build 74
Moderators: dorpond, trevor, Azhrei, Craig
Re: MapTool 1.3 Bugfix Build 74
same here
Re: MapTool 1.3 Bugfix Build 74
Oh, forgot to mention; saw the template jitter Monday night! Offline you don't see it, but when I connected to my buddy's game with b74, the template center was jumping all over the place, as described. More of a visual bug than anything, though - didn't stop me from laying down templates where I wanted.
Re: MapTool 1.3 Bugfix Build 74
Me too.CoveredInFish wrote:+1. Happened several times.skester wrote:using Build 74 I'm noticing a lot that when I load a campaign, not everything shows up on the map initially, but if I zoom in or out then everything pops up.
Re: MapTool 1.3 Bugfix Build 74
I'm seeing the "not everything rendered in viewport" issue as well. Here's a couple screenshots to illustrate it, hopefully. This is in b74, just after opening a campaign file.
After opening, at the initial zoom of 100%, the viewport looks like this:
There are normally 2 more of the large red library tokens in that set, off to the right of the 4 visible ones. They are not appearing on screen (which was the cause of some alarm at one point!). However, if I zoom out one click on my mouse-wheel (which takes the zoom level from 100% to 74%), (edited to add or move the map in any way), the other two appear as shown below. I guess requiring a redraw might correct an erroneous viewport size?
Once I alter the zoom level, this particular visual glitch doesn't happen again until the next time the campaign is opened.
After opening, at the initial zoom of 100%, the viewport looks like this:
There are normally 2 more of the large red library tokens in that set, off to the right of the 4 visible ones. They are not appearing on screen (which was the cause of some alarm at one point!). However, if I zoom out one click on my mouse-wheel (which takes the zoom level from 100% to 74%), (edited to add or move the map in any way), the other two appear as shown below. I guess requiring a redraw might correct an erroneous viewport size?
Once I alter the zoom level, this particular visual glitch doesn't happen again until the next time the campaign is opened.
Last edited by Rumble on Thu Sep 23, 2010 10:30 am, edited 2 times in total.
Re: MapTool 1.3 Bugfix Build 74
I am also interested in knowing if this issue has been resolved, or is planned for upcoming bug fixes.
http://forums.rptools.net/viewtopic.php?f=3&t=14443
Thank you
http://forums.rptools.net/viewtopic.php?f=3&t=14443
Thank you
Re: MapTool 1.3 Bugfix Build 74
Anyone who is using the source code build: please test the pre-b75 release. I've added MetaGamer's patch for allowing an entire map to be exported, but I'm getting memory overflows in some cases. Note that you need to select the Advanced tab and choose the "ImageWriter" technique to test his new code. (Help messages in this regard will need to be added at some point; this is for testing only.)
(I could have just answered these questions directly, but that encourages people to ask questions that they could answer themselves. No offense intended, guys!)
I posted the answer two days ago in my 11:50PM post.skester wrote:has this issue been looked at?
http://forums.rptools.net/viewtopic.php?f=3&t=16057
Thanks,
Skester
Your answer is in the ChangeLog for b72.Zandel wrote:I am also interested in knowing if this issue has been resolved, or is planned for upcoming bug fixes.
http://forums.rptools.net/viewtopic.php?f=3&t=14443
Thank you
(I could have just answered these questions directly, but that encourages people to ask questions that they could answer themselves. No offense intended, guys!)
Re: MapTool 1.3 Bugfix Build 74
Thanks,
I wasn't entirely sure it was the same issue.
Skester
I wasn't entirely sure it was the same issue.
Skester
- CoveredInFish
- Demigod
- Posts: 3104
- Joined: Mon Jun 29, 2009 10:37 am
- Location: Germany
- Contact:
Re: MapTool 1.3 Bugfix Build 74
I always get thisAzhrei wrote:Anyone who is using the source code build: please test the pre-b75 release. I've added MetaGamer's patch for allowing an entire map to be exported, but I'm getting memory overflows in some cases. Note that you need to select the Advanced tab and choose the "ImageWriter" technique to test his new code. (Help messages in this regard will need to be added at some point; this is for testing only.)
error msg
java.lang.Error: Unresolved compilation problems:
The method putContent(InputStream) in the type Location is not applicable for the arguments (ImageWriter, BufferedImage)
The method putContent(InputStream) in the type Location is not applicable for the arguments (ImageWriter, ZoneImageGenerator)
at net.rptools.maptool.client.ui.ExportDialog.screenCapture(ExportDialog.java:615)
at net.rptools.maptool.client.ui.ExportDialog.exportButtonAction(ExportDialog.java:534)
at net.rptools.maptool.client.ui.ExportDialog.access$1(ExportDialog.java:493)
at net.rptools.maptool.client.ui.ExportDialog$1.actionPerformed(ExportDialog.java:423)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at net.rptools.maptool.client.swing.MapToolEventQueue.dispatchEvent(MapToolEventQueue.java:24)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.Dialog$1.run(Unknown Source)
at java.awt.Dialog$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Unknown Source)
at java.awt.Component.show(Unknown Source)
at java.awt.Component.setVisible(Unknown Source)
at java.awt.Window.setVisible(Unknown Source)
at java.awt.Dialog.setVisible(Unknown Source)
at net.rptools.maptool.client.ui.ExportDialog.setVisible(ExportDialog.java:470)
at net.rptools.maptool.client.AppActions$2.execute(AppActions.java:201)
at net.rptools.maptool.client.AppActions$ClientAction.actionPerformed(AppActions.java:2623)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at de.muntjak.tinylookandfeel.TinyMenuItemUI.doClick(TinyMenuItemUI.java:571)
at de.muntjak.tinylookandfeel.TinyMenuItemUI$MouseInputHandler.mouseReleased(TinyMenuItemUI.java:421)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at net.rptools.maptool.client.swing.MapToolEventQueue.dispatchEvent(MapToolEventQueue.java:24)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
The method putContent(InputStream) in the type Location is not applicable for the arguments (ImageWriter, BufferedImage)
The method putContent(InputStream) in the type Location is not applicable for the arguments (ImageWriter, ZoneImageGenerator)
at net.rptools.maptool.client.ui.ExportDialog.screenCapture(ExportDialog.java:615)
at net.rptools.maptool.client.ui.ExportDialog.exportButtonAction(ExportDialog.java:534)
at net.rptools.maptool.client.ui.ExportDialog.access$1(ExportDialog.java:493)
at net.rptools.maptool.client.ui.ExportDialog$1.actionPerformed(ExportDialog.java:423)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at net.rptools.maptool.client.swing.MapToolEventQueue.dispatchEvent(MapToolEventQueue.java:24)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.Dialog$1.run(Unknown Source)
at java.awt.Dialog$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Unknown Source)
at java.awt.Component.show(Unknown Source)
at java.awt.Component.setVisible(Unknown Source)
at java.awt.Window.setVisible(Unknown Source)
at java.awt.Dialog.setVisible(Unknown Source)
at net.rptools.maptool.client.ui.ExportDialog.setVisible(ExportDialog.java:470)
at net.rptools.maptool.client.AppActions$2.execute(AppActions.java:201)
at net.rptools.maptool.client.AppActions$ClientAction.actionPerformed(AppActions.java:2623)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at de.muntjak.tinylookandfeel.TinyMenuItemUI.doClick(TinyMenuItemUI.java:571)
at de.muntjak.tinylookandfeel.TinyMenuItemUI$MouseInputHandler.mouseReleased(TinyMenuItemUI.java:421)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at net.rptools.maptool.client.swing.MapToolEventQueue.dispatchEvent(MapToolEventQueue.java:24)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
EDIT: nevermind. It seemed my updating wasnt complete.
EDIT2: I got a map export but it was pretty broken (fragments of images in the wrong place, other images missing). And there was a huge black area around my painted map - does the export code any trimming?
I will test more...
Re: MapTool 1.3 Bugfix Build 74
Did a couple dozen exports from both GM & Player clients in both modes with no errors produced. Except as noted below the maps were all correct.Azhrei wrote:Anyone who is using the source code build: please test the pre-b75 release. I've added MetaGamer's patch for allowing an entire map to be exported, but I'm getting memory overflows in some cases. Note that you need to select the Advanced tab and choose the "ImageWriter" technique to test his new code.
- The Fog hover help text is hosed.
- Exporting GM View and just Fog selected produced a black image and not the current fog mask.
- The Fog layer checkbox doesn't cause the export of a separate file as the hover help indicates but seems to just toggle whether or not the Fog layer is included in the rendered output.
- The Visibility layer checkbox seems to be a toggle for showing a single (or selected?) tokens view or a party view and not saving the VBL as an image.
- Disable Background Thread selection since it doesn't work.
Re: MapTool 1.3 Bugfix Build 74
Azhrei, thank you, I now know where to look, but I don't see viewtopic.php?f=3&t=14443 listed there, maybe I am missing it or not reading them right
Thanks
Thanks
- jfrazierjr
- Deity
- Posts: 5176
- Joined: Tue Sep 11, 2007 7:31 pm
Re: MapTool 1.3 Bugfix Build 74
Ok.. I sent a patch for this and the GM FOW opacity view thing to AzhreiAzhrei wrote:Got your patch, Joe; it's been applied and will be in b75. It does look like those changes will take care of the IndividualViews thing not working.jfrazierjr wrote:Will you get my fix for Phergus and Dorpond's issue? I also have a few updates to tokenMove.
Edit: Not working 100%. When I switch to PlayerView (without a server running), there are some changes to the map, but the solid fog doesn't come up until I zoom in/out using the mouse wheel. Could it be that Ctrl-Shift-P is calling a repaint method before it sets up everything needed by the renderer...? I guess comparing the re-rendering process used by Ctrl-Shift-P with the one used by the mouse wheel might show why one displays properly and the other doesn't...?
Wanted to get b75 out this evening, but working against a deadline. Now I'm shooting for tomorrow evening.
I save all my Campaign Files to DropBox. Not only can I access a campaign file from pretty much any OS that will run Maptool(Win,OSX, linux), but each file is versioned, so if something goes crazy wild, I can always roll back to a previous version of the same file.
Get your Dropbox 2GB via my referral link, and as a bonus, I get an extra 250 MB of space. Even if you don't don't use my link, I still enthusiastically recommend Dropbox..
Get your Dropbox 2GB via my referral link, and as a bonus, I get an extra 250 MB of space. Even if you don't don't use my link, I still enthusiastically recommend Dropbox..
Re: MapTool 1.3 Bugfix Build 74
Got some "Spousal Duties" tonight and tomorrow, but should have some time during the day. I will apply Joe's latest patch (the GM_FOW patch) and commit to SVN right now. Then b75 will be tomorrow and will include that patch unless something obviously breaks during my testing.
- jfrazierjr
- Deity
- Posts: 5176
- Joined: Tue Sep 11, 2007 7:31 pm
Re: MapTool 1.3 Bugfix Build 74
Question on builds and testing. From what I recall, the only thing that needs to be "fixed" when you build a local copy is the build.number file right? I assume nothing is uploaded anywhere correct? So, how about you do the build, make it available in a limited membership forum for the testers to check out for a few days and if it's good, move to the correct places for the zip and jnlp files. If problems that have to be fixed come up, just svn revert the build.number file, apply patches and redo.Azhrei wrote:Got some "Spousal Duties" tonight and tomorrow, but should have some time during the day. I will apply Joe's latest patch (the GM_FOW patch) and commit to SVN right now. Then b75 will be tomorrow and will include that patch unless something obviously breaks during my testing.
Is that something that is possible with your current build process?
I save all my Campaign Files to DropBox. Not only can I access a campaign file from pretty much any OS that will run Maptool(Win,OSX, linux), but each file is versioned, so if something goes crazy wild, I can always roll back to a previous version of the same file.
Get your Dropbox 2GB via my referral link, and as a bonus, I get an extra 250 MB of space. Even if you don't don't use my link, I still enthusiastically recommend Dropbox..
Get your Dropbox 2GB via my referral link, and as a bonus, I get an extra 250 MB of space. Even if you don't don't use my link, I still enthusiastically recommend Dropbox..
Re: MapTool 1.3 Bugfix Build 74
It would be nice to get it in a few more hands for testing before release.