MapTool 1.3 Development Build 35
Moderators: dorpond, trevor, Azhrei, Craig
-
- Giant
- Posts: 172
- Joined: Sat Jun 14, 2008 10:44 pm
Performance
Has anyone reported a performance hit with this version?
I had my first game last night, mine hosted, another computer connected via LAN and one connected via the internet.
We had horrid lag just trying to move around.
I was thinking perhaps I had to many trees and other things around the town and such, so after the game I went about cleaning things up. This is when I noticed that 'erasing' vision was taking a long time. When I used the 'erase' vision, it would pause for about 2 seconds. Whereas before it was instantaneous.
I had my first game last night, mine hosted, another computer connected via LAN and one connected via the internet.
We had horrid lag just trying to move around.
I was thinking perhaps I had to many trees and other things around the town and such, so after the game I went about cleaning things up. This is when I noticed that 'erasing' vision was taking a long time. When I used the 'erase' vision, it would pause for about 2 seconds. Whereas before it was instantaneous.
The GM should be allowed to remove vision and control the token for the player.UntoldGlory wrote:Which would be okay if we had MBL, but we don't. And I don't play 3.5 anymore. In 4e, it does this:
Blinded
✦ You grant combat advantage.
✦ You can’t see any target (your targets have total concealment).
✦ You take a –10 penalty to Perception checks.
✦ You can’t flank an enemy.
Edit: I suppose the GM could just change the token to an NPC token at that point.
- UntoldGlory
- Great Wyrm
- Posts: 1649
- Joined: Sun Mar 16, 2008 8:12 pm
I know that performance issues have been mentioned, and that it was blamed on colored light, but I'm noticing a serious hit even when all I've got on the screen is grasslands with a bunch on NPC no sight tokens. It seems to come in waves though, I haven't been able to figure out if some particular thing is causing it or not. It appears to be like that on both my desktop (Windows XP, Core2Duo Processor with 2 Gig of ram, 8800GT Nvidia card) or my laptop (Crappy Turion processor with integrated graphics and a gig of ram). I use the 1gig batch file. Though I rarely see it allocate more than 100m of ram.
-
- Giant
- Posts: 172
- Joined: Sat Jun 14, 2008 10:44 pm
- UntoldGlory
- Great Wyrm
- Posts: 1649
- Joined: Sun Mar 16, 2008 8:12 pm
- thecyberwolfe
- Dragon
- Posts: 312
- Joined: Thu Jun 26, 2008 3:57 pm
- Location: The Great Wet North
Slowness
UG, I too have seen some performance problems, but I thought it might have something to do with me running it on my (K)Ubuntu Hardy laptop (Turion64 mobile proc, 2GB RAM). It zips like a fiend on my tower (Windows XP on an Athlon64X2, 2GBRAM and beefy vid card), but the problem usually arises about 30 - 40 minutes into me working on my own KoTS maps. MT pretty much gets useless, and I have to try a save and hope for the best.
Again, this is on my laptop - I haven't tried exporting the whole campaign to the Windows machine and building it there yet.
Once I exit and restart the program, it will usually repeat quickly unless I either reboot or just do something else for a while. Kinda like a memory leak that the OS needs to clean up for a while.
Again, this is on my laptop - I haven't tried exporting the whole campaign to the Windows machine and building it there yet.
Once I exit and restart the program, it will usually repeat quickly unless I either reboot or just do something else for a while. Kinda like a memory leak that the OS needs to clean up for a while.
- UntoldGlory
- Great Wyrm
- Posts: 1649
- Joined: Sun Mar 16, 2008 8:12 pm
I noticed a strange occurance... I assume a bug. (I have not read this thread carefully to check if it has been report.)
If I create a token say a Kobold with a damage macro and place multiple versions of the token on the table and run the damage macro, it only affects the first kobold no matter what kobold I have selected. To fix this I had to go into each token and rename the token with a unique name... i.e. Kobold1, Kobold2, Kobold3, etc.
If I create a token say a Kobold with a damage macro and place multiple versions of the token on the table and run the damage macro, it only affects the first kobold no matter what kobold I have selected. To fix this I had to go into each token and rename the token with a unique name... i.e. Kobold1, Kobold2, Kobold3, etc.
That's not a bug per se but it's a design limitation. This behavior will no be changed in the near future. Always use unique names for tokens.nwelte1 wrote:I noticed a strange occurance... I assume a bug. (I have not read this thread carefully to check if it has been report.)
If I create a token say a Kobold with a damage macro and place multiple versions of the token on the table and run the damage macro, it only affects the first kobold no matter what kobold I have selected. To fix this I had to go into each token and rename the token with a unique name... i.e. Kobold1, Kobold2, Kobold3, etc.
If you want more info, you can read it here: http://forums.rptools.net/viewtopic.php?t=4637
- UntoldGlory
- Great Wyrm
- Posts: 1649
- Joined: Sun Mar 16, 2008 8:12 pm
I had something strange happen last night. The PCs have a couple of players with darkvision, one with lowlight, and three with normal. The environment has a few patches of glowing fungus that I represented with light sources on the hidden layer. It worked pretty well, and gave a sort of patchy quality to where the players could see.
Then they alerted a group of enemies in a room lit by an everburning torch. One of the NPCs nabbed the everburning torch and came out of the room to see what the hubbub was all about, but as soon as I gave the NPC a light source, all the tokens disapeared from player view. It was as if everyone lost vision. I was able to toggle it back by removing the light source from the NPC.
Was this an artifact of the fact that none of the PCs had an actual light source? There were non-token light sources in the campaign. Is there something else strange happening? In addition, when this happened, the whole program slowed significantly.
I am running b35, incidentally.
Then they alerted a group of enemies in a room lit by an everburning torch. One of the NPCs nabbed the everburning torch and came out of the room to see what the hubbub was all about, but as soon as I gave the NPC a light source, all the tokens disapeared from player view. It was as if everyone lost vision. I was able to toggle it back by removing the light source from the NPC.
Was this an artifact of the fact that none of the PCs had an actual light source? There were non-token light sources in the campaign. Is there something else strange happening? In addition, when this happened, the whole program slowed significantly.
I am running b35, incidentally.
-
- Kobold
- Posts: 2
- Joined: Sun Jul 20, 2008 7:26 pm
Re: MapTool 1.3 Development Build 35
Not sure where to mention this so I'm putting it here. The SR4 dice work great (yay!) except that the glitch detection is a little wrong. A glitch is caused when you get a one on half the dice rolled, rounded up. For example, on 5 dice you need 3 ones, not 2. We had that happen once.trevor wrote: * Added support for Shadow Run 4 rolls (Contributed by mortani)
Thanks!