SpeakForMe: Speak as a token without impersonating it
Moderators: dorpond, trevor, Azhrei, giliath, Gamerdude, jay, Mr.Ice
Re: SpeakForMe: Speak as a token without impersonating it
Thanks! Yeah, it's easy to miss a post here and there, even on "your" own threads. But even with this one slip-up, the average helpfulness level of this Forum, and Rumble in particular, is still quite high.
"Fairy tales do not tell children the dragons exist. Children already know that dragons exist. Fairy tales tell children the dragons can be killed."
- G. K. Chesterton
Wonderful HTML/CSS reference * Color Manager * Token Manager 2.0
- G. K. Chesterton
Wonderful HTML/CSS reference * Color Manager * Token Manager 2.0
Re: SpeakForMe: Speak as a token without impersonating it
Our game upgraded to b70 today and it seems whatever you did earlier to try to get word wrapping to work now works in b70. Yay!
Drop-In Utilities:
My Spell Manager for D&D3.5 and PFRPG
My Inventory Manager for D&D and PFRPG, but more generally useable than that.
My Message Manager -- My Top-Down D&D Token Images
and my Custom Initiative & Status/Spell-Effect Tracker (work in progress, but functional).
My Spell Manager for D&D3.5 and PFRPG
My Inventory Manager for D&D and PFRPG, but more generally useable than that.
My Message Manager -- My Top-Down D&D Token Images
and my Custom Initiative & Status/Spell-Effect Tracker (work in progress, but functional).
Re: SpeakForMe: Speak as a token without impersonating it
Warn't me - kraagenbrink (kragenbrink? kraggenbrink?) updated the source to get wrapping to work in frames; I just happened to have the proper wrap settings in my frame in the hopes that one day someone would do that!plothos wrote:Our game upgraded to b70 today and it seems whatever you did earlier to try to get word wrapping to work now works in b70. Yay!
Re: SpeakForMe: Speak as a token without impersonating it
Yeah, I figured that was it, since we hadn't changed any tokens.
Drop-In Utilities:
My Spell Manager for D&D3.5 and PFRPG
My Inventory Manager for D&D and PFRPG, but more generally useable than that.
My Message Manager -- My Top-Down D&D Token Images
and my Custom Initiative & Status/Spell-Effect Tracker (work in progress, but functional).
My Spell Manager for D&D3.5 and PFRPG
My Inventory Manager for D&D and PFRPG, but more generally useable than that.
My Message Manager -- My Top-Down D&D Token Images
and my Custom Initiative & Status/Spell-Effect Tracker (work in progress, but functional).
Re: SpeakForMe: Speak as a token without impersonating it
I have a problem in B70 with SpeakForMe using Lindsay's 3.5/Pathfinder Framework. When I try to launch SpeakForMe, I get an error about "Error executing switchToken unknown token XXXX.". No matter what I do, I get this error if there is a PC token on the map. So, I tried troubleshooting and I get an error if any of the States have a space in them, such as Protection from Good, Protection from Evil... The error is when the states are being read into the JSON as it asks for value exProtection when it should be exProtection from Good. Is there a way to run a replace looking for spaces and replace it with _ and then reverse it later?
Re: SpeakForMe: Speak as a token without impersonating it
Hey Rumble et al,
I am trying this for the 1st time and I get an error when I try to use it:
Undefined function: rspk.configStates
Is there some post that describes how to set this up?
Thanks in advance.
I am trying this for the 1st time and I get an error when I try to use it:
Undefined function: rspk.configStates
Is there some post that describes how to set this up?
Thanks in advance.
My DnD blog - http://ncdnd.blogspot.com/
Re: SpeakForMe: Speak as a token without impersonating it
Did you reload the campaign or manually click onCampaignLoad? I'm just guessing, but that's probably a UDF that didn't get initialized.
Drop-In Utilities:
My Spell Manager for D&D3.5 and PFRPG
My Inventory Manager for D&D and PFRPG, but more generally useable than that.
My Message Manager -- My Top-Down D&D Token Images
and my Custom Initiative & Status/Spell-Effect Tracker (work in progress, but functional).
My Spell Manager for D&D3.5 and PFRPG
My Inventory Manager for D&D and PFRPG, but more generally useable than that.
My Message Manager -- My Top-Down D&D Token Images
and my Custom Initiative & Status/Spell-Effect Tracker (work in progress, but functional).
Re: SpeakForMe: Speak as a token without impersonating it
OK, the States with spaces problem doesn't seem to be a problem as I just have to keep clicking OK. However, it seems that some tokens do not work with SpeakForMe. On the surface, they look the same and act the same in the FW. So, I am stumped. Attached is a token that does not work with the SpeakForMe resource.neofax wrote:I have a problem in B70 with SpeakForMe using Lindsay's 3.5/Pathfinder Framework. When I try to launch SpeakForMe, I get an error about "Error executing switchToken unknown token XXXX.". No matter what I do, I get this error if there is a PC token on the map. So, I tried troubleshooting and I get an error if any of the States have a space in them, such as Protection from Good, Protection from Evil... The error is when the states are being read into the JSON as it asks for value exProtection when it should be exProtection from Good. Is there a way to run a replace looking for spaces and replace it with _ and then reverse it later?
- Attachments
-
- Johah al-Bimin.rptok
- (64.87 KiB) Downloaded 101 times
Re: SpeakForMe: Speak as a token without impersonating it
Not sure if this is something you checked, but just to be sure, since it's tripped me up before:neofax wrote:OK, the States with spaces problem doesn't seem to be a problem as I just have to keep clicking OK. However, it seems that some tokens do not work with SpeakForMe. On the surface, they look the same and act the same in the FW. So, I am stumped. Attached is a token that does not work with the SpeakForMe resource.
How exactly is this not working for you? Are the tokens just not showing up in the drop-downs? If so, are you running it as GM? Because the lists there are determined by the current view on screen. Zoom in and fewer will be available, when you refresh the lists or start the window anew. (Determining factor is when the lists are populated, of course).
Just making sure you knew that before anybody looks deeper into token props and such.
Drop-In Utilities:
My Spell Manager for D&D3.5 and PFRPG
My Inventory Manager for D&D and PFRPG, but more generally useable than that.
My Message Manager -- My Top-Down D&D Token Images
and my Custom Initiative & Status/Spell-Effect Tracker (work in progress, but functional).
My Spell Manager for D&D3.5 and PFRPG
My Inventory Manager for D&D and PFRPG, but more generally useable than that.
My Message Manager -- My Top-Down D&D Token Images
and my Custom Initiative & Status/Spell-Effect Tracker (work in progress, but functional).
Re: SpeakForMe: Speak as a token without impersonating it
I don't even get the frame. I only get an error in the chat saying switchToken did not work. However, it is strange as I can delete the token after saving it and then reimport it and then it works. However, I should not have to do this.
Re: SpeakForMe: Speak as a token without impersonating it
Possibilities - there's an unknown character, a comma, a single quote, or simply an extra space in the token name. If so, speakforme might be trimming it, and it turns out that the tokens "John" and "John " are different tokens. so if the error is "unknown token ____" it probably means the name being sent to switchToken is not the actual name of the token, but differs by some small amount.neofax wrote:I don't even get the frame. I only get an error in the chat saying switchToken did not work. However, it is strange as I can delete the token after saving it and then reimport it and then it works. However, I should not have to do this.
I apologize for not seeing this sooner; I'll check it out when I get a chance. I can't keep up with my threads!
Re: SpeakForMe: Speak as a token without impersonating it
Good call, that does sound like the most likely cause.
Drop-In Utilities:
My Spell Manager for D&D3.5 and PFRPG
My Inventory Manager for D&D and PFRPG, but more generally useable than that.
My Message Manager -- My Top-Down D&D Token Images
and my Custom Initiative & Status/Spell-Effect Tracker (work in progress, but functional).
My Spell Manager for D&D3.5 and PFRPG
My Inventory Manager for D&D and PFRPG, but more generally useable than that.
My Message Manager -- My Top-Down D&D Token Images
and my Custom Initiative & Status/Spell-Effect Tracker (work in progress, but functional).
- LeopoldVonRanke
- Giant
- Posts: 123
- Joined: Thu Jun 17, 2010 2:50 pm
- Location: Maine
- Contact:
Re: SpeakForMe: Speak as a token without impersonating it
Hi Rumble, I have a problem with wanting to send text to the chatbox without an author symbol;it's only indirectly related to your drop-in, but still...
see the thread at http://forums.rptools.net/viewtopic.php ... 74#p177574
I'm afraid this needs your help, I couldn't figure it out...
Thanks for your time...
Leo
see the thread at http://forums.rptools.net/viewtopic.php ... 74#p177574
I'm afraid this needs your help, I couldn't figure it out...
Thanks for your time...
Leo