Unable to access jarfile maptool-*.jar Error
Moderators: dorpond, trevor, Azhrei
Forum rules
PLEASE don't post images of your entire desktop, attach entire campaign files when only a single file is needed, or generally act in some other anti-social behavior.
PLEASE don't post images of your entire desktop, attach entire campaign files when only a single file is needed, or generally act in some other anti-social behavior.
Unable to access jarfile maptool-*.jar Error
Hi
Used to use the older '76' version of MapTools without any problems, but now I've updated (to version '86' it doesn't work.
I'm running Vista on a Dual Core processor, with 2GM RAM. I've deinstalled/reinstalled both Maptools & Java (Version 6 Update 25), and even installed on different HDD in case there wasn't enough space for swapfiles.
When clicking on the Launcher .exe file I used to get a small screen confirming memory config, pressing OK got the above error message. Now the memory config window doesn't even open - it goes straight to the error message.
Not sure how/what's gone wrong. Any chance of some help?
Thanks
Paul H
Used to use the older '76' version of MapTools without any problems, but now I've updated (to version '86' it doesn't work.
I'm running Vista on a Dual Core processor, with 2GM RAM. I've deinstalled/reinstalled both Maptools & Java (Version 6 Update 25), and even installed on different HDD in case there wasn't enough space for swapfiles.
When clicking on the Launcher .exe file I used to get a small screen confirming memory config, pressing OK got the above error message. Now the memory config window doesn't even open - it goes straight to the error message.
Not sure how/what's gone wrong. Any chance of some help?
Thanks
Paul H
Re: Unable to access jarfile maptool-*.jar Error
Does b76 still work? If so then I would suspect something wrong with the archive you downloaded or how (and maybe where) it was extracted.
That message is usually the result of the zip file being extracted incorrectly.
Does the b86 folder look like the b76 folder in terms of content? b86 should have 16 files and a directory in it when extracted. b76 was probably a couple less.
That message is usually the result of the zip file being extracted incorrectly.
Does the b86 folder look like the b76 folder in terms of content? b86 should have 16 files and a directory in it when extracted. b76 was probably a couple less.
Re: Unable to access jarfile maptool-*.jar Error
Hi
Thanks for checking - the error was my end. The unzip s/ware I was using didn't extract the files (though it said it did). Changed to WinRar & everything seems OK.
Thanks for the help
Paul H
Thanks for checking - the error was my end. The unzip s/ware I was using didn't extract the files (though it said it did). Changed to WinRar & everything seems OK.
Thanks for the help
Paul H
Re: Unable to access jarfile maptool-*.jar Error
Excellent. Glad you're up and running.
Re: Unable to access jarfile maptool-*.jar Error
Hello. I am having the same problem. I am trying to run maptool-1.3.b87. I re-installed Java Runtime Environment. I re-installed Maptool. This hasn't helped.
After double-clicking MapToolLauncher, I receive the "MapTool Launcher Settings" screen with the memory limits. I click "OK", then I receive "Error: Unable to access jarfile maptool-*.jar".
I read the messages above. I normally use Izarc to extract archives, so I downloaded Winrar, but this creates the same problem, as well as installing a load of crapware.
Thanks for your help.
After double-clicking MapToolLauncher, I receive the "MapTool Launcher Settings" screen with the memory limits. I click "OK", then I receive "Error: Unable to access jarfile maptool-*.jar".
I read the messages above. I normally use Izarc to extract archives, so I downloaded Winrar, but this creates the same problem, as well as installing a load of crapware.
Thanks for your help.
Re: Unable to access jarfile maptool-*.jar Error
Axl wrote:Hello. I am having the same problem. I am trying to run maptool-1.3.b87. I re-installed Java Runtime Environment. I re-installed Maptool. This hasn't helped.
After double-clicking MapToolLauncher, I receive the "MapTool Launcher Settings" screen with the memory limits. I click "OK", then I receive "Error: Unable to access jarfile maptool-*.jar".
I read the messages above. I normally use Izarc to extract archives, so I downloaded Winrar, but this creates the same problem, as well as installing a load of crapware.
Thanks for your help.
Are you running Windows 8? We had some fun over the weekend trying to get MapTool running on Windows 8. The best way we found to start MapTool was to use one of the batch files instead of the launcher. Edit the batch file and replace "maptool-*.jar" with "maptool-1.3.b87.jar". Windows 8 evidently doesn't like wildcards in it's command line. At least not in the same way previous versions of Windows did.
Re: Unable to access jarfile maptool-*.jar Error
It's more likely both of you are using Java 7 update 10, which introduced a bug with regard to wildcards being treated as literal, most likely a side-effect of their bugfix for another wildcard related problem. I'd suggest using Java 6 update 38+ exclusively for MapTool as b87 is incompatible with Java 7 on many fronts. There are instructions on how to go about this somewhere in the forums. If you want to avoid the wildcard problem in general, downgrade to Java 7 update 9 and hope Oracle issues a fix in update 11.
My stuff for the community:
Donate to the Mote Project
The Mote Project's G+ community
Mote on Facebook
Fully Customizable Calendar Drop-in
Donate to the Mote Project
The Mote Project's G+ community
Mote on Facebook
Fully Customizable Calendar Drop-in
Re: Unable to access jarfile maptool-*.jar Error
Ahh, ok, that you for that info.
Re: Unable to access jarfile maptool-*.jar Error
Downgrading to Java 6 worked for me! I turned off autoupdate so it doesn't upgrade to 7.
Thanks guys.
Thanks guys.
-
- Kobold
- Posts: 2
- Joined: Fri Jan 25, 2013 12:54 am
Re: Unable to access jarfile maptool-*.jar Error
Hello, I encountered this problem and came up with a solution that doesn't require doing anything to Java. All MapToolLauncher.exe seems to do is specify the memory and launch the jar. In the maptool folder itself are several batch (.bat) files, editable with notepad, etc, that have memory presets and allow you bypass MapToolLauncher.exe. The batch file is just a list of commands to run. The whole contents of "Launch MapTool-1G-Memory.bat" for example is:
The problem with the existing batch files, on my machine at least, is that they call Java without including the full path, and so my machine can't find java as java is not in my machine's path setting.
One solution is to specify the full path of javaw.exe and your specific maptool jar (maptool-1.3.b87.jar in my case) Just make a new batch file, call it "Launch MapTool-1024M-Memory_fixed.bat" or whatever you like, edit in notepad and put:
e.g., on my machine:
You can then put a shortcut to that batch file in your start menu or wherever you desire.
Cheers!
Code: Select all
javaw -Xmx1024M -Xss512K -jar maptool-1.3.b87.jar run
One solution is to specify the full path of javaw.exe and your specific maptool jar (maptool-1.3.b87.jar in my case) Just make a new batch file, call it "Launch MapTool-1024M-Memory_fixed.bat" or whatever you like, edit in notepad and put:
Code: Select all
"<location where java is installed on your machine>\javaw.exe" -Xmx<your desired memory max> -Xss<your desired memory min> -jar "<location of the maptool jar>\<your exact version filename>"
Code: Select all
"C:\Program Files (x86)\Java\jre7\bin\javaw.exe" -Xmx1024M -Xss2048k -jar "D:\Users\R\Documents\Games\maptool\maptool-1.3.b87\maptool-1.3.b87.jar"
Cheers!
Re: Unable to access jarfile maptool-*.jar Error
Just updated to Java 7 version 13 and this is still a problem. I've found I can go back to Java 7 version 7 and it works fine. Anyway, my question is this: Can you set the stack size from a batch file? I see how and where to set the min and max memory sizes, but the MapToolLauncher.exe file also lets you set the Stack Size. The default is 2 but for a campaign I'm playing in I need it to be 3. Is there a command I can add to a batch file to tell it to set the stack size to 3?
Re: Unable to access jarfile maptool-*.jar Error
-Xss2M
Will set it to 2mb
'ss' stands for stack size.
Will set it to 2mb
'ss' stands for stack size.
GETTING STARTED WITH MAPTOOLS - TUTORIALS, DOCS, VIDEOS, TOOLS, ETC
DISCORD (the new MT forum!)
My stuff
Excel Tools: Table and Light editors
MT Tools: Bag of Tricks: Tools for Maptool, Dungeon Builder I, Dungeon Builder II,onMouseOverEvent.
Frameworks: Dark Heresy, Rogue Trader, Deathwatch, Black Crusade, Only War, SET Card Game, RoboRally
Wiki: Debugging Tutorial, Speed Up Your Macros, Working With Two CODE Levels, Shortcut Keys, Avoiding Stack Overflow, READ THIS
DISCORD (the new MT forum!)
My stuff
Excel Tools: Table and Light editors
MT Tools: Bag of Tricks: Tools for Maptool, Dungeon Builder I, Dungeon Builder II,onMouseOverEvent.
Frameworks: Dark Heresy, Rogue Trader, Deathwatch, Black Crusade, Only War, SET Card Game, RoboRally
Wiki: Debugging Tutorial, Speed Up Your Macros, Working With Two CODE Levels, Shortcut Keys, Avoiding Stack Overflow, READ THIS
Re: Unable to access jarfile maptool-*.jar Error
Isn't this answered in the README file that is created when you unzip the download file? If it's not, it should be.lespaulio wrote:Can you set the stack size from a batch file?
Re: Unable to access jarfile maptool-*.jar Error
I am getting the same thing. Unable to access .jar file
tried using the "web starter" from the read me file to no avail.
Can't find older version of java to install apart from java 6.
reinstalled java 7 version 13 to no avail.
using xp pak3. any other solutions other than installing java 6?
Feeling a bit stuck ?!?
ideas?
tried using the "web starter" from the read me file to no avail.
Can't find older version of java to install apart from java 6.
reinstalled java 7 version 13 to no avail.
using xp pak3. any other solutions other than installing java 6?
Feeling a bit stuck ?!?
ideas?
Re: Unable to access jarfile maptool-*.jar Error
read 4 posts up (5 by now) there it tells you exactly what you need to do. Note however that MT b87 is NOT compatible with j7 (it should run, but you'll get errors when using certain functions). In the announcements you should find a link to an j6 install.flyndad wrote:I am getting the same thing. Unable to access .jar file
tried using the "web starter" from the read me file to no avail.
Can't find older version of java to install apart from java 6.
reinstalled java 7 version 13 to no avail.
using xp pak3. any other solutions other than installing java 6?
Feeling a bit stuck ?!?
ideas?
GETTING STARTED WITH MAPTOOLS - TUTORIALS, DOCS, VIDEOS, TOOLS, ETC
DISCORD (the new MT forum!)
My stuff
Excel Tools: Table and Light editors
MT Tools: Bag of Tricks: Tools for Maptool, Dungeon Builder I, Dungeon Builder II,onMouseOverEvent.
Frameworks: Dark Heresy, Rogue Trader, Deathwatch, Black Crusade, Only War, SET Card Game, RoboRally
Wiki: Debugging Tutorial, Speed Up Your Macros, Working With Two CODE Levels, Shortcut Keys, Avoiding Stack Overflow, READ THIS
DISCORD (the new MT forum!)
My stuff
Excel Tools: Table and Light editors
MT Tools: Bag of Tricks: Tools for Maptool, Dungeon Builder I, Dungeon Builder II,onMouseOverEvent.
Frameworks: Dark Heresy, Rogue Trader, Deathwatch, Black Crusade, Only War, SET Card Game, RoboRally
Wiki: Debugging Tutorial, Speed Up Your Macros, Working With Two CODE Levels, Shortcut Keys, Avoiding Stack Overflow, READ THIS