TokenTool Cuts Off Right and Bottom Edge of Some Overlays

Thoughts, Help, Feature Requests

Moderators: dorpond, trevor, Azhrei

Post Reply
User avatar
RedDog
Dragon
Posts: 393
Joined: Sat Jan 05, 2008 10:02 pm
Location: Clearwater, FL

TokenTool Cuts Off Right and Bottom Edge of Some Overlays

Post by RedDog »

While using TokenTool today I noticed that a small bit of the right and bottom edge of the circular overlays were being cut off. I did not see it reported, so here we are. This is not occurring with square overlays.

I've attached a copy of the Orange overlay tested with in Token Tool, a copy of the resulting output, and an example that highlights the bits being cut off.

Thanks.
Attachments
Orange TokenTool Output Missing Bits.png
Orange TokenTool Output Missing Bits.png (6.4 KiB) Viewed 9004 times
Orange TokenTool Output.png
Orange TokenTool Output.png (27.81 KiB) Viewed 9004 times
OrangeOverlay.png
OrangeOverlay.png (27.63 KiB) Viewed 9004 times

User avatar
RedDog
Dragon
Posts: 393
Joined: Sat Jan 05, 2008 10:02 pm
Location: Clearwater, FL

Re: TokenTool Cuts Off Right and Bottom Edge of Some Overlays

Post by RedDog »

After posting this I wondered if it might be that TokenTool cannot quite discern the transparent edge of the drop shadow on the right and bottom.

User avatar
RedDog
Dragon
Posts: 393
Joined: Sat Jan 05, 2008 10:02 pm
Location: Clearwater, FL

Re: TokenTool Cuts Off Right and Bottom Edge of Some Overlays

Post by RedDog »

Is TokenTool still being worked on then?


Post Reply

Return to “TokenTool”